014-1065-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Slanghaspel in RVS as the primary system on

as the primary system on earth-moving machinery and for machinery refueling on the field

The digital flow meters allow to show correctly the push-button delivery

The operating pressure of the pumps can vary between a minimum of 3 bar and a maximum of 8 bar

Fix and complete positions that offer an independent working station

It is equipped with a wall-fixing bracket which makes the fixing to wall easier

014-1065-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Slanghaspel in RVS as the primary system onIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.